Plastic Ball Valve
MVS Two Way Plastic Ball Valve is manufactured in Three Piece Design having Full Bore corrosion resistant Body in Isotactic PP, PPH, PVDF and HDPE with end connection as flanged and screwed or threaded.
MVS PVDF Ball Valve is commonly used by very demanding industries such as pharmaceutical, chemical and food industry as it offers great advantages for industrial use as it supports temperatures from -4°F (-20°D) to 248°F (120°D), its smooth surface prevents the development of micro-organisms, it is resistant to Ultra-Violet and highly corrosive agents.
These plastic ball valve performs an on/off or modulating function. A hole through the center of the ball along one axis connects the inlet and outlet ports of the body. In the open position, the flow is straight-through, and there is minimal pressure drop when the porting through the ball is the same size as the inside diameter of the pipe.
Technical Specifications of Plastic Ball Valve
1) Construction : 3 Piece Design, Single Piece Stem (Spindle) Reinforced Ball, PTFE Seated, Full Bore.
2) Design & Manufacturing Standard : As per Manufacturer’s Standard
3) Size Range : 15 mm to 300 mm (Flanged Ends), 15 mm to 100 mm (Threaded Ends)
4) End Connections : Flanged as per ANSI B 16.5 (150#), BS 10 (Table D/E/F) & DIN STD, Screwed Ends as per BSP
5) Material Options : PP (Polypropylene), HDPE (High Density Polyethylene), ISOTACTIC PP, PPH, PVDF (Poly-Vinyli-dene-Fluoride)
6) Hydrostatic Test : At 10 kg/sq.cm.g for Body and Seat.
7) Engineering Options : PVDF Ball / MS PVDF Coated stem on request, SS 304 / SS 316 Parts / Fasteners can be supplied
8) Operation : Manual Lever, Electro Pneumatic Valve Positioner, Pneumatic Valve Positioner, Pneumatic rotary Actuator, Electrical Actuator, Solenoid Valve, Limit Switch, Gear Box, Air Filter Regulator etc.
Features of MVS Plastic Ball Valve
Valves are of three piece design, fitted with six set of metallic studs and nuts which contributes to their sturdy construction.
Valves have full bore; thereby, allowing full 100% flow.
Body and Stem seals are offered in various elastomers like EPDM, Neoprene, Hyplon, Butyl, Viton. And also in PTFE for chemical resistance against most chemicals.
Valves with PTFE seals are provided with steel ring inserts which gives better sealing and safety features.
Steel inserts in stem and handle give more strength, sturdiness, longer life and better performance.
Carbon black resists ultraviolet rays and prevents degradation of polypropylene in sunlight exposure.
Available in screwed end connections also.